Pre-Master (25") Cold Roll Laminator
The Pre-Master quickly applies cold lamination film to material without causing heat related damage. Using the Pre-Master will save you the extra hours it takes doing the same work by hand. Easy to set up, it is the versatile solution to cold lamination needs. Econocraft laminators operate similar to a hot laminator and includes many of the same features such as adjustable speed, reverse drive switch and tension adjustment knobs. The Pre-Master can laminate material up to 25-inches wide and 7/16-inches thick. Order yours today!
Note: Because of the wide variety of 220-volt outlets, this 220-volt unit may include a power cord without a plug, or require an adapter (purchased separately).
We strongly advise you to have a plug attached by a licensed electrician. We are not responsible for electrical wiring errors.
Click here to request an official quote!
| Please e-mail us for the price and/or the availability of any models. |
See specs below for more information.
Pre-Master : Retail value $2,500.00
Pre-Master 220V : Retail value $2,600.00
Do you need supplies? Click Here.
Features
Factory Training Available ($1,200 per day plus expenses). Manufactured in the USA. Variable speed motor. Roller bearings. Non-ferrous feed tray. Interchangeable rubber rollers. Reverse drive switch. Supply roll tension knobs. Bottom supply roll assembly. Max. Film Roll Diameter is 6 inches. A scrap rewind. Don't forget your lamination film!
Options & Accessories
|
|
| |
Pre-Master 110V |
Pre-Master 220V |
| Max. Laminating Width |
25" |
| Variable Speed |
0-10 feet per minute |
| Laminating Roller Diameter |
1-1/4" |
| Supply Roll Core Size |
3" |
| Recommended Film |
1 mil. and up |
| Max. Laminating Thickness |
7/16" |
| Max. Film Roll Diameter |
6" |
| Dimensions |
33" L x 17" H x 18" D |
| Shipping Weight |
57 lbs. |
| Electrical (single-phase) |
110V, 3 amps, 300 watts |
220V, 3 amps, 300 watts |
| Motor |
1/30 HP DC |
| Warranty |
2 years |
| Product Code |
LAMREEPJR25 |
LAMREEPJR25220V |
Feel free to contact us with any questions you might have.
|